Q35Y series hydraulic ironworkers adopt the hydraulic driving system. Ironworker can cut punch all kinds of holes. Various metal plates, square bar, angle steel, round iron, flat bar, profiled bars, channel steel and joist steel can be cut, punched, and notched on the machines.
There are multi-function machines combined as a hydraulic ironworker machine, for example, ironworker machine, press machine, steelworker machine, hydraulic ironworker machine, hydraulic steelworker machine, punching machine, and shearing machine.
Full range of universal punches and dies are available.
提供全系列的通用冲孔和冲模。
Unique style allows for large angle iron punching and large channel punching.
允许进行大角度的铁冲孔、打各式各样的孔型及多方法的冲孔。
Large viewing window on stripper swing-away design for ease of operation.
模板上的大观察窗可摆动，易于操作。
Large two-piece gauging table with rulers and stop as standard fittings.
大型两件式测量台带有标尺，标准配置为挡块。
Quick change coupling nut and sleeve for rapid replacement of change.
可快速更换连接螺母和套筒。
SHEARING 剪切
Round and square bar shear has multiple holes for a variety of sizes. Adjustable hold-down device for round/ square bar, channel/ beam cutting.
圆杆和方杆剪有多个各种尺寸的孔。可调压紧装置，用于圆/方棒，槽/梁切割。
Large strong guarding for maximum safety.
大型坚固的防护装置可最大程度地确保安全。
The angle shear has the ability to cut angle at 45°both top and bottom leg. This gives the operator the ability to make a picture frame corner for perfect welds.
角剪可以在上下支腿之间以45°的角度切角。这使操作员能够制作相框角以进行完美的焊接。
Diamond-shaped blade for quality cuts that is minimal material lost and deformity.
菱形刀片可减少质量损失，减少畸形。
Easily adjustable hold-down device for accurate plate cutting.
易于调节的压紧装置，可精确切割板材。
Large 15″ squaring arm with inlaid scale.
带有刻度的15英寸平方臂。
Lower blade has four usable edges. Special anti-distorted blade for quality cutting.
刀片下有四个可用边缘。特殊的防扭曲刀片，可进行高质量切割。
There is screw allow for gap adjust no shim needed.
有螺钉，可进行间隙调整，无需垫片。
NOTCHING 开槽
Unique design allows for cutting of angle and flat bar.
独特的设计允许切割角钢和扁钢。
Electrical interlock safety guard and three gauging stops for precise positioning.
内置电气互锁安全防护装置和三个计量挡块，用于精确定位。
The notching section of this hydraulic ironworker is perfect for notching out metal plate, angle iron and much more.
该液压铁工的开槽部分非常适合开槽金属板、角铁等。
The notching station also has an oversized table with material stops. This section of the machine can also be outfitted with the optional V-notcher.
切槽台上还有带有一个超大工作台及挡块。机器的此部分还可以配备可选的V型槽口。
OTHER FUNCTIONS: 其他功能：
TECHNICAL DATA: 技术数据：
NO. 号码
FUNCTIONS 功能
VALVE 数值
1
SHEARING
剪切
FLAT PLATE (MM)
平板（毫米）
200 x 12
MAXIMUM CAPACITY (MM)
最大能力（毫米）
300
2
PUNCHING
冲孔
THICKNESS (MM)
厚度（毫米）
12
MAXIMUM DIAMETER (MM)
最大直径（毫米）
22
PRESSURE (TON)
压力（公吨）
50
DEPTH OF THROAT (MM)
喉口深度（毫米）
175
MAXIMUM STROKE (MM)
最大行程（毫米）
50
STROKE TIMES (TIMES/MIN)
行程次数（次数/米）
20
3
SECTION CUTTING
切面
ROUND (MM)
圆形（毫米）
30
SQUARE – SIDE LENGTH (MM)
正方形 – 边长（毫米）
30
CHANNEL (MM)
长形（毫米）
80
4
ANGLE CUTTING 切角
EQUAL ANGLE AT 90° (MM)
等角90°（毫米）
100 x 10
EQUAL ANGLE AT 45° (MM)
等角45°（毫米）
70 x 6
5
NOTCHING
开槽
THICKNESS (MM)
厚度（毫米）
8
WIDTH (MM)
宽度（毫米）
35
DEPTH (MM)
深度（毫米）
80
6
MATERIAL STRENGTH (N/MM2)
板料强度（牛/平方毫米）
≤450
7
MOTOR POWER (KW)
电机功率（千瓦）
3
8
OVERALL DIMENSIONS (MM) – L X W X H
整体尺寸（毫米）- 长 X 宽 X 高
