WIM MIG 210S

Description

WIM MIG 210S:
WIM牌子熔化极惰性气体保护焊210S:

DESCRIPTION:
描述：

MIG 210S is designed throughout research on light industries usage and automotive industries to arrive at a reliable machine to meet the requirements for the industries.
The problem caused by “Burn Through” is common in the light gauge metal welding by the MIG process has been eradicated with MIG 210S.
This is done through better circuitry in the electronic board, good quality rectification components and effective wire feeder.
Finally, with careful insulation during transformer construction, with high-quality lamina plates as the iron core and superior primary and secondary windings process enable us to achieve a high output with maximum efficiency for this class of power source.
熔化极惰性气体保护焊210S已在对轻工业及汽车工业进行了全面研究，从而设计出这款机器，以满足工业的要求。
熔化极惰性气体保护焊210S消除了常常因使用熔化极惰性气体保护焊工艺进行的轻型金属焊接而出现的“烧穿”问题。
烧穿”问题能够解决是因为变频器使用了电子板上更好的电路、高质量的整流组件和有效的送丝器。
最后，因为在变频器构造过程中进行了仔细的绝缘处理，以高质量的薄铁皮薄板作为铁芯，并采用出色的初级和次级绕组工艺，因此我们能够在此类电源中以最大的效率实现高输出。

FEATURES:
特性：

1. The MIGWELD series are easy to adjust. Coarse and fine voltage steps are clearly marked on the power source, providing easy control and quick value setting.
   MIGWELD系列易于调整。粗略和精细的电压步骤清晰地标在电源上，从而易于控制和快速设置。
2. The MIG 210S is with an internal wire feeder.
   熔化极惰性气体保护焊210S带有内部送丝器。
3. The MIG 210S has a 2 steps voltage selection. These MIGWELD welding characteristics are excellent both in CO2 and mixed gas.
   熔化极惰性气体保护焊210S具有2极电压选择。MIGWELD的焊接特性是在于，它能在二氧化碳和混合气体中使用得非常出色。
4. Better welding parameters 0.6mm – 1.6mm (Min 30amps – Max 500amps).
   更好的焊接参数是0.6毫米 – 1.6毫米（最小30安培 –最大500安培）。
5. Heavy-duty chassis construction.
   重型底盘结构。
6. Double thermal protection for transformer and rectifier.
   变频器和整流器有双重热保护。
7. Ergonomic and value-added features (Tool container, torch holder and gas tray holder).
   附有增值功能，例如工具容器、割炬支架和气体托盘支架。

ACCESSORIES:
配件：

1. Mig Torch.
   熔化极惰性气体保护焊焊炬。
2. Earth Clamp.
   地线夹头。
3. Gas Regulator.
   气体调节器。

TECHNICAL DATA:
技术数据：