Email: hardyeshop888@gmail.com

Email: hardyeshop888@gmail.com

Product Details

POWERWELD HARDFACING 700R HARDSURFACING ELECTRODE

POWERWELD HARDFACING 700R HARDSURFACING ELECTRODE

Clear
Compare
SKU: HARDFACING-700R Categories: ,

Share this product

Description

POWERWELD HARDFACING 700R HARDSURFACING ELECTRODE:
POWERWELD牌子硬质合金700R硬表面电焊条:

DESCRIPTION:
描述:

  • Wear Resistant, high Carbon Martensitic Steel Deposit.
  • Rutile Type, AC/ DC hard Surfacing Electrode.
  • For a Wide Range Of General hard Surfacing Applications, Such As Tyres, Blades and Augers, Etc.

HARDFACING 700r is a smooth running, AC/DC electrode which deposits an air-hardening martensitic steel alloy. HARDFACING 700r deposits one of the hardest steel alloys available and is free from relief checks. It is suitable for a wide range of applications including the surfacing of post hole augers, agricultural points, shares and tyres, grader and cultivator blades and other components subject to fatigue or flexing during service.

  • 耐磨高碳马氏体钢矿床。
  • 金红石型,交流/ 直流硬质堆焊电焊条。
  • 适用于各种普通的硬质表面处理应用,例如轮胎、刀片和螺旋钻等。

HARDFACING 700R是运行平稳的交流/ 直流电焊条,可沉积空气硬化的马氏体钢合金。 HARDFACING 700R沉积了一种最硬的合金钢,并且没有浮雕检查。它适用于广泛的应用,包括钻孔后螺旋钻、农用要点、轮胎、平地机和中耕机刀片以及其他在使用过程中容易弯曲的组件的表面处理。

DEPOSIT PROPERTIES:
沉淀性质:

HARDFACING 700R deposits an air-hardening steel alloy which can be readily hot forged and offers good resistance to all types of abrasion under low to moderate impact conditions. In the “as welded” condition, HARDFCING 700R weld metal cannot be machined without prior heat treatment.

HARDFACING 700R沉积了一种空气硬化钢合金,该合金可以很容易地进行热锻,并且在中低冲击条件下具有良好的抗各种磨损性能。在“焊接状态”下,如果未经事先热处理,HARDFCING 700R就无法焊接金属。

CHARACTERISTICS:
特征:

TYPICAL ALL WELD METAL COMPOSITION (Wt%)
典型的全焊接金属成分(重量%)
C

0.08
Mn

0.41
Si

0.5
Cr

8.0
Mo

0.25
V

0.45
Fe

Bal
DEPOSIT HARDNESS
沉积硬度
SINGLE-LAYER ONTO MILD STEEL MULTI-LAYER
单层到软钢多层
TYPICAL HARDNESS: 53~56 HRC
TYPICAL HARDNESS: 55~60 HRC
典型硬度:53~56洛氏硬度
典型硬度:55~60洛氏硬度

* Single layer deposit hardness may vary depending on base metal type and degree of dilution.
单层沉积物的硬度可能会因母材类型和稀释程度而异。

TECHNICAL DATA:
技术数据:

* Recommended for DC + or AC (minimum 45 OCV) operation.
建议用于直流电+或交流电(最少45开路电压)操作。

Additional information

ELECTRODE DIAMETER

3.2MM, 4.0MM, 5.0MM

WEIGHT

5KG PER TUBE, 20KG PER CARTON